Predloga:Infopolje jama
Ime jame je obvezno |
---|
This template can be used to create an infobox for articles about caves. See the section about caves of the British Isles.
Vsebina
Usage[uredi kodo]
Minnetonka Cave | |
---|---|
Minnetonka Cave, administered by the U.S. Forest Service | |
Lokacija | Bear Lake County, Idaho, United States |
Koordinate | 42°05′14″N 111°31′07″W / 42.08722°N 111.51861°W |
Odkrita | 1907 |
Geologija | Karst cavern, Mississippian Limestone |
Vhodi | 1 |
Dostop | Tours are available in season |
This is a table of the most used parameter names.
{{Infopolje jama | name = | other_name = | photo = | photo_width = | photo_caption = | map = | map_width = | map_caption = | map_alt = | location = | coords = | lat_d = | lat_m = |lat_s = | lat_NS = | long_d = | long_m = | long_s = | long_EW = | coords_ref = | land_registry_number = | grid_ref_UK = | grid_ref_Ireland = | grid_ref = | depth = | length = | height_variation = | altitude = | discovery = | geology = | entrance_count = | entrance_list = | difficulty = | hazards = | access = | show_cave = | show_cave_length = | lighting = | visitors = | features = | survey = | survey_format = | website = | embedded = <!--dodatne informacije --> }}
Parameter descriptions[uredi kodo]
This table describes all parameters which can be used in building infoboxes. Only the name
parameter must be assigned a value.
Parameter | Description |
---|---|
name |
Required. The name of the cave. It will be displayed at the top of the infobox. In most cases this should be the same as the article name less any disambiguation. For example if the article title is Blue Grotto (Capri) then use name=Blue Grotto .
|
other_name |
If there is a common English name for the cave use it for the name parameter. This parameter can be used to display the name in the local language or for an alternate English name if it is commonly used. If you would like to italicize the text use wiki markup.
|
photo |
The name of an image file to be displayed. No special formatting is needed. |
photo_width |
Determines the width of the image. The default and maximum value is 256px. Images with a horizontal orientation (landscape mode) will generally display well at the default setting. An image with vertical orientation (portrait mode) will need to be adjusted. For example photo_width=200 and not photo_width=200px .
|
photo_alt |
Alt text for the photo, for visually impaired readers. See WP:ALT. |
photo_caption |
The caption that will appear below the image if one is required. |
map |
The name of the map to be displayed. See Map display methods. |
map_width |
Determines the width of the map. The default width is 220px and maximum width is 256px. For example map_width=180 and not map_width=180px .
|
map_alt |
Alt text for the map. See WP:ALT. |
map_caption |
The caption that will appear below the map if one is required. |
relief |
Selects a relief map when assigned any value. This is functional when a location map template is used. See Map display methods. |
mark |
A marker which shows the location of the cave on a map. The default image is Red pog.svg. For more information, go here. |
marker_size |
The width of the location marker image in pixels. Seldom used. The default width is 8px. |
label_position |
This seldom used parameter will generate a text label next to the a location marker. Valid values are left , right , top and bottom . If no value is assigned to the label parameter below, the name will be used.
|
label |
Text that will be displayed next to the location marker. See label_position above.
|
location |
The location of the cave. Don't be too precise. County, state and country are good in the USA. If the area is within a city specify the city, state and country. If the area is in multiple counties just list the state and country. For areas in other countries adjust accordingly. The text should be meaningful to a reader who lacks knowledge of local geography. |
coords |
For the {{Coord}} template. This syntax will not automatically generate a location marker on a map. When this option is used the type , region , scale , source , format and display parameters are not functional but this data can be entered in the {{Coord}} template. The defaults should be type:landmark and display:inline,title .
|
lat_d |
The degrees of latitude. This value can be specified as a decimal degree and when this format is used minutes and seconds should not be specified. |
lat_m |
The minutes of latitude. |
lat_s |
The seconds of latitude. |
lat_NS |
N if north of the equator, S if south of the equator. Other values will be disregarded. |
long_d |
The degrees of longitude. This value can be specified as a decimal degree and when this format is used minutes and seconds should not be specified. |
long_m |
The minutes of longitude. |
long_s |
The seconds of longitude. |
long_EW |
E if East of the prime meridian, W if west of the prime meridian. Other values will be disregarded. |
coords_ref |
Used with either coordinate display method above. Strongly recommended. Specify a citation for the coordinates using <ref>...</ref> tags.
|
land_registry_number |
Reference number of the cave in the relevant land registry. |
type |
Type is one way to specify the scale of maps generated by external map websites. See WP:COORD TYPE for valid values. The default value is landmark which is most appropriate for caves. This parameter and the three below help GeoHack in selecting suitable map resources.
|
scale |
Determines the zoom factor for external map websites. See WP:COORD SCALE. Using scale=50000 will change the zoom factor to 1:50,000.
|
region |
A country code. See ISO 3166-2:US, ISO 3166-2 and ISO 3166-1 alpha-2. For example US-OR is the code for Oregon. This computer readable code is recommended. It will not be displayed. See WP:COORD REGION. |
source |
Source of the coordinate data. See WP:COORD SOURCE. It will not be displayed. |
format |
Determines the format used to the display coordinates. Valid values are dms for degrees, minutes and seconds, and dec for decimal degrees. The default is dms .
|
display |
Determines where the coordinates will be displayed. Valid values are inline and inline,title . The default is inline,title and is recommended.
|
x y |
Specifies the position of the location marker on a map image. The coordinates of the marker in pixels based on a map with a width of 1000 pixels. The template will scale these values for proper display. See below. |
x% y% |
Specifies the position of the location marker on a map image. x% specifies the percentage of the distance across the image from the left edge and y% specifies the percentage of the distance down from the top edge. See below.
|
depth |
The distance from the surface to the deepest portion of the cave. |
length |
The surveyed length of the cave. |
height_variation |
The variation in height of the [show] cave passageway, e.g. 5m (+2m, -3m) |
altitude |
The elevation of the cave entrance above sea level. |
discovery |
The date the cave was discovered and who discovered it. |
geology |
Is the cave in limestone, marble, dolomite, shale, conglomerate, basalt or something else. Is it a sea cave, lava tube, or karst cave. See the Cave article. |
entrance_count |
The number of entrances. |
entrance_list |
A list of entrances. |
difficulty |
The skill level required to explore the cave safely. Don't use a number unless you supply a link to site that explains what the number means. |
hazards |
Are there hazards such as sumps, flooding, strong underwater currents, rock falls, or histoplasmosis. |
access |
Is access private, public, restricted, by permit only, etc? When are tours available. |
show_cave |
See the show cave article. Give the year it was opened. |
show_cave_length |
The length of the show cave tour. |
lighting |
What kind of lighting is used in the show cave. |
visitors |
The number of visitors in a recent year if known. |
features |
Features of special interest found in the cave, which might include speleogens such as boxwork, anthodites, lavacicles, or helictites. |
survey |
If a cave survey has been done, then when was it and who did it. |
survey_format |
The cave survey software package used. For example: Survex. |
register |
The name of a cave registry. Preferably with a footnote citing the register webpage. |
register |
The name of a cave registry. Preferably with a footnote citing the register webpage. |
Map display methods[uredi kodo]
Any image of a map showing the location of the protected area can be used. There are three methods by which maps showing a marker can be generated.
Prikaz oznake na zemljevidu z uporabo predloge in geografskih koordinat[uredi kodo]
Oznaka se lahko prikaže na zemljevidu s pomočjo uporabe posebnih predlog za zemljevide. Za prikaz oznake morajo biti geografske koordinate opredeljene v parametrih lat_d
, long_d
, izd. Glej dokumentacijo za {{Lokacijska karta}}. Parametri te predloge so vhodni parametri, ki jih uporablja {{Lokacijska karta}}. Predloge za zemljevid se lahko najdejo tukaj:
- Predloga:Lokacijska karta#Zemljevidi na razpolago - kar nekaj lokacijskih kart je preusmeritev in nekatere mogoče ne delujejo kot pričakujete.
- Kategorija:Lokacijske karte - Preloge po kategorijah.
- Posebno:KajSePovezujeSem/Predloga:Lokacijska karta/Info - iskalnik, ki lahko pomaga.
- Special:Prefixindex/Predloga:Lokacijska karta - še en iskalnik, ki lahko pomaga.
Vsa imena se začnejo z besedama "Lokacijska karta", ki jima sledi območje, ki jo pokriva. Vrednost, ki jo morate opredeliti, je ime območja. Zemljevid za Kanado je Lokacijska karta Kanade. V tem primeru opredelite map=Kanade
. Ker obstaja tudi preusmeritev Lokacijska karta Canada, lahko uporabite tudi map=Canada
.
Four Corners, Kanada | |
---|---|
Primer uporabe geografskih koordinat | |
Koordinate | 60°00′00″N 102°00′00″W / 60.00000°N 102.00000°W |
{{Infopolje jama | name = Four Corners, Kanada | map = Canada | map_caption = Primer uporabe geografskih koordinat | lat_d = 60 | lat_m = 00 | lat_s = 00 | lat_NS = N | long_d = 102 | long_m = 00 | long_s = 00 | long_EW = W }}
Prikaz oznake na kateremkoli zemljevidu z uporabo x
in y
parametrov[uredi kodo]
Vrednosti parametrov za x
in y
sta piksel koordinati lokacijske oznake, če je slika v velikosti do širine 1000 pikslov.
x
je odmik oznake v pikslih od levega roba 1000 pikslov široke slike.y
je odmik oznake v pikslih od zgornjega roba 1000 pikslov široke slike.
Obstajata dva načina pridobitve teh vrednosti:
- Na svoj računalnik naloži sliko iz strani slike. Odpri sliko v grafičnem urejevalcu, kot je GIMP ali XnView. Spremeni velikost slike na širino 1000px in potem določi x, y koordinati ko kurzor računalniške miške kaže na želeno lokacijo. Uporabi te vrednosti.
- Na svoj računalnik naloži sliko iz strani slike. Odpri sliko v kateremkoli računalniškem programu za urejanje slik, ki prikazuje koordinate položaja kurzorja, kot je Microsoftov program Paint. Bodi pozoren na to, da x, y koordinate korzorja kažejo na lokacijo. potem:
- 1000 ·x'w = x in 1000 ·y'w = y
- kjer sta x' in y' kurzorja koordinat, w je širina prikazane slike na tvojem računalniku ter x in y sta vrednosti, ki jih je potrebno prirediti
x
iny
parametroma.
- kjer sta x' in y' kurzorja koordinat, w je širina prikazane slike na tvojem računalniku ter x in y sta vrednosti, ki jih je potrebno prirediti
Four Corners, Kanada | |
---|---|
Primer uporabe x in y parametrov |
{{Infopolje jama | name = Four Corners, Kanada | map = Canada location map.svg | map_caption = Primer uporabe x in y parametrov | x = 369 | y = 487 }}
Prikaz oznake na kateremkoli zemljevidu z uporabo x%
in y%
parametrov[uredi kodo]
- x% opredeli procent razdalje preko slike od levega roba.
- y% opredeli procent razdalje preko slike navzdol od zgornjega roba.
V spodnjem primeru je oznaka 36.9% od levega roba in 57.4% od zgornjega roba.
Four Corners, Kanada | |
---|---|
Primer uporabe x% in y% parametrov |
{{Infopolje jama | name = Four Corners, Kanada | map = Relief map of Canada.png | map_caption = Primer uporabe x% in y% parametrov | x% = 36.9 | y% = 57.4 }}
Parameters for use in articles about caves of the British Isles[uredi kodo]
Field name | Description |
---|---|
grid_ref_UK |
If the cave is in Great Britain, the British grid reference. |
grid_ref_Ireland |
If the cave is in Ireland (whether Northern Ireland or the Republic), the Irish grid reference. |
grid_ref |
Specify a citation for the grid reference using <ref>...</ref> tags.
|
Example of an infobox for a cave in the British Isles[uredi kodo]
Aveline's Hole | |
---|---|
![]() Aveline's Hole | |
Lokacija | Mendip Hills, Somerset, England |
OS grid | ST 4761 5867 |
Globina | 16 m (52 ft) |
Dolžina | 68 m (223 ft) |
Nadmorska višina | 99 m (325 ft) |
Odkrita | 1797 |
Geologija | Limestone |
Register | Mendip Cave Registry[1] |
{{Infopolje jama | name = Aveline's Hole | photo = Avelineshole.jpg | photo_caption = Aveline's Hole | location = [[Mendip Hills]], [[Somerset]], [[England]] | grid_ref_UK = ST 4761 5867 | depth = {{convert|16|m}} | length = {{convert|68|m}} | altitude = {{convert|99|m}} | discovery = 1797 | geology = Limestone | difficulty = | hazards = | access = | register = Mendip Cave Registry<ref>{{cite mcra |id=3 |name=Aveline's Hole |accessdate=2012-03-30}}</ref> }}
For other registries consider using <ref>...</ref>
tags and {{cite web}}.
References example
Zgornja dokumentacija je vključena iz Predloga:Infopolje jama/dok. (uredi | zgodovina) Urejevalci lahko preizkušate urejanja v peskovniku predloge (uredi | primerjava) in testniprimeri (uredi). Prosimo, da dodate kategorije in medjezikovne povezave v /dok podstran. Podstrani te predloge. |